PVR 150 Remote (new grey one)
Hi everyone. I'm having slightly perplexing problem. I've installed MythDora 2.1 without any big problems. In fact the only problem I've had is with the remote that comes with the pvr 150. As far as I can tell it's working because when I execute /usr/bin/irw it spits out output when I press buttons on the remote. But in MythTV nothing responds to any input from the remote. I've searched the mailing list and this forum and I've read that it might be a focus problem but I'm not sure how it pertains to my situation. Any help would be appreciated.
The following is an excerpt from /var/log/messages and my lircd.conf file:
Thanks in advance.
May 12 01:05:13 MythTV kernel: lirc_dev: lirc_register_plugin: sample_rate: 10
May 12 01:05:13 MythTV lircd-0.8.0[2210]: lircd(userspace) ready
May 12 01:05:15 MythTV fstab-sync[2273]: removed all generated mount points
May 12 01:05:19 MythTV kernel: nvidia: module license 'NVIDIA' taints kernel.
May 12 01:05:19 MythTV kernel: ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
May 12 01:05:19 MythTV kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
May 12 01:05:19 MythTV kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7676 Fri Jul 29 12:58:54 PDT 2$
May 12 01:05:20 MythTV kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
May 12 01:05:20 MythTV kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
May 12 01:05:20 MythTV kernel: agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
May 12 01:05:20 MythTV kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
May 12 01:05:20 MythTV kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
May 12 01:05:20 MythTV kernel: agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
May 12 01:05:24 MythTV gdm-autologin(pam_unix)[2558]: session opened for user mythtv by (uid=0)
May 12 01:05:31 MythTV lircd-0.8.0[2210]: accepted new client on /dev/lircd
May 12 01:08:23 MythTV ntpd[2002]: synchronized to LOCAL(0), stratum 10
May 12 01:08:23 MythTV ntpd[2002]: kernel time sync disabled 0041
May 12 01:09:25 MythTV ntpd[2002]: synchronized to 192.36.143.151, stratum 1
May 12 01:09:25 MythTV ntpd[2002]: kernel time sync enabled 0001
May 12 01:11:58 MythTV kernel: input: AT Translated Set 2 keyboard as /class/input/input2
May 12 01:12:04 MythTV lircd-0.8.0[2210]: removed client
May 12 01:12:11 MythTV lircd-0.8.0[2210]: accepted new client on /dev/lircd
May 12 01:12:13 MythTV lircd-0.8.0[2210]: removed client
May 12 01:14:35 MythTV su(pam_unix)[2821]: session opened for user root by (uid=1000)
May 12 01:14:40 MythTV lircd-0.8.0[2210]: caught signal
May 12 01:14:43 MythTV su(pam_unix)[2821]: session closed for user root
May 12 01:14:48 MythTV su(pam_unix)[2850]: session opened for user root by (uid=1000)
May 12 01:14:43 MythTV su(pam_unix)[2821]: session closed for user root
May 12 01:14:48 MythTV su(pam_unix)[2850]: session opened for user root by (uid=1000)
May 12 01:25:01 MythTV lircd-0.8.0[2886]: lircd(userspace) ready
May 12 01:25:03 MythTV lircd-0.8.0[2886]: accepted new client on /dev/lircd
May 12 01:25:15 MythTV lircd-0.8.0[2886]: removed client
May 12 01:25:27 MythTV lircd-0.8.0[2886]: accepted new client on /dev/lircd
May 12 01:25:27 MythTV lircd-0.8.0[2886]: removed client
May 12 01:29:08 MythTV lircd-0.8.0[2886]: caught signal
May 12 01:29:09 MythTV lircd-0.8.0[2915]: lircd(userspace) ready
May 12 01:29:14 MythTV lircd-0.8.0[2915]: accepted new client on /dev/lircd
May 12 01:30:04 MythTV lircd-0.8.0[2915]: removed client
May 12 01:30:14 MythTV lircd-0.8.0[2915]: accepted new client on /dev/lircd
and my lircd.conf file
begin remote
name grayHauppauge
bits 13
flags RC5
eps 30
aeps 100
one 0 0
zero 0 0
gap 200966
repeat_bit 2
begin codes
Power 0x00000000000017BD
Go 0x0000000000001FBB
TV 0x000000000000179C
Videos 0x0000000000001F98
Music 0x0000000000001799
Pictures 0x0000000000001F9A
Guide 0x000000000000179B
Radio 0x0000000000001F8C
UP 0x0000000000001794
LEFT 0x0000000000001F96
RIGHT 0x0000000000001797
DOWN 0x0000000000001F95
OK 0x00000000000017A5
Back-Exit 0x0000000000001F9F
Menu 0x000000000000178D
Prev-Channel 0x0000000000001F92
Mute 0x000000000000178F
Volume-UP 0x0000000000001F90
Volume-DOWN 0x0000000000001791
Channel-UP 0x0000000000001FA0
Channel-DOWN 0x00000000000017A1
Record 0x0000000000001FB7
Stop 0x00000000000017B6
Rewind 0x0000000000001FB2
Forward 0x00000000000017B4
Play 0x0000000000001FB5
Previous 0x00000000000017A4
Next 0x0000000000001F9E
Pause 0x00000000000017B0
1 0x0000000000001F81
2 0x0000000000001782
3 0x0000000000001F83
4 0x0000000000001784
5 0x0000000000001F85
6 0x0000000000001786
7 0x0000000000001F87
8 0x0000000000001788
9 0x0000000000001F89
0 0x0000000000001780
star 0x0000000000001F8A
hash 0x000000000000178E
red 0x0000000000001F8B
green 0x00000000000017AE
yellow 0x0000000000001FB8
blue 0x00000000000017A9
end codes
end remote
OK, when you get into an
OK, when you get into an xterm screen to check irw and then when your finished, do not startup the frontend as mythfrontend. Right click on the desktop, go to Multimedia -> MythTV. This will start the correct mythfrontend and everything else that needs to start. Most people don't know this. I really need to put this up somewhere.
"Please ignore the man behind the curtain"
Dennis
"Please ignore the man behind the curtain"
Dennis
nevermind
It was my lircrc file. Fixed that and it works now. Thanks though =)
Didn't work
I tried what you said and it didn't work. There's still no response from the remote in mythtv. Any other ideas?
Thanks again
oops
meant for the above comment to appear down here
What was wrong with the
What was wrong with the lircrc file? That shouldn't need any editing.
"Please ignore the man behind the curtain"
Dennis
"Please ignore the man behind the curtain"
Dennis
I was messing around
Somone had told me that I needed to copy my lircd.conf to /home/mythtv/.mythtv. Not having any experience with LIRC I did it. Good thing I made a back up of it first. Anyway, I just overwrote the backup and restarted the lirc daemon. Worked like a charm.
There isn't any need to do
There isn't any need to do that as MythDora does all this for you. Unless you chose the wrong remote to start with.
"Please ignore the man behind the curtain"
Dennis
"Please ignore the man behind the curtain"
Dennis
I know
I realize that now :)