Dvico Dual Fusion MCE Remote Lirc info
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: SELECT data, created, headers, expire, serialized FROM cache_filter WHERE cid = '1:29eefef4cb0323a06c2c660886f156d6' in /var/www/mythdora/html/includes/cache.inc on line 26.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: UPDATE cache_filter SET data = '<p>Finally cracked it due to Dennis\' help and suggestions.</p>\n<p>I\'ve finally got full remote functionality with my Dvico dual fusion dvb-t card and the MCE remote</p>\n<p>My /etc/lircd.conf is as follows courtesy of Makkus from Whirlpool:</p>\n<p>begin remote</p>\n<p>name lirc.conf<br />\nbits 16<br />\neps 30<br />\naeps 100</p>\n<p>one 0 0<br />\nzero 0 0<br />\npre_data_bits 16<br />\npre_data 0x1<br />\ngap 251714<br />\ntoggle_bit 1<br />\nrepeat_bit 2</p>\n<p>begin codes</p>\n<p>DTV 0x0179<br />\nMP3 0x0187<br />\nDVD 0x0185<br />\nCPF 0x016C<br />\nSETUP 0x008D<br />\nSWITCH_OFF_TV 0x0164<br />\nGUIDE 0x016D<br />\nBACK 0x009E<br />\nDVD_MENU 0x008B<br />\ni 0x0166<br />\nALT_TAB 0x000F<br />\nREPLAY 0x00A5<br />\nSKIP 0x00A3<br />\nSTART 0x001C<br />\nOK 0x0160<br />\nUP 0x0067<br />\nRIGHT 0x006A<br />\nDOWN 0x006C<br />\nLEFT 0x0069<br />\nVOL_UP 0x0073<br />\nVOL_DOWN 0x0072<br />\nCH_UP 0x0192<br />\nCH_DOWN 0x0193<br />\nSCREENSHOT 0x00D4<br />\nLIVE 0x0182<br />\nOPEN_FOLDER 0x0086<br />\n1 0x0002<br />\n2 0x0003<br />\n3 0x0004<br />\n4 0x0005<br />\n5 0x0006<br />\n6 0x0007<br />\n7 0x0008<br />\n8 0x0009<br />\n9 0x000A<br />\n0 0x000B<br />\nTOGGLE_ASPECT_RATIO 0x0173<br />\nFULLSCREEN 0x0174<br />\nREWIND 0x00A8<br />\nPLAY 0x00A4<br />\nFORWARD 0x00D0<br />\nMUTE 0x0071<br />\nSTOP 0x0080<br />\nREC 0x00A7<br />\nSWITCH_OFF 0x0074</p>\n<p>end codes</p>\n<p>end remote</p>\n<p>And my /etc/sysconfig/lircd is:</p>\n<p>LIRCD_OPTIONS=\"--driver=dev/input --device=/dev/input/event2\"</p>\n<p>Enjoy!</p>\n', created = 1369322665, expire = 1369409065, headers = '', serialized = 0 WHERE cid = '1:29eefef4cb0323a06c2c660886f156d6' in /var/www/mythdora/html/includes/cache.inc on line 109.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: SELECT data, created, headers, expire, serialized FROM cache_filter WHERE cid = '1:0d030b4e3b562c9a52a619f2d58715c6' in /var/www/mythdora/html/includes/cache.inc on line 26.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: UPDATE cache_filter SET data = '<p>Hey glad that worked. So it\'s safe to say that the lircd.conf I have now will not work with a dual dvico dvb-t card? I can add another remote in for sure if thats the case. </p>\n<p>\"Please ignore the man behind the curtain\"<br />\nDennis</p>\n', created = 1369322665, expire = 1369409065, headers = '', serialized = 0 WHERE cid = '1:0d030b4e3b562c9a52a619f2d58715c6' in /var/www/mythdora/html/includes/cache.inc on line 109.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: SELECT data, created, headers, expire, serialized FROM cache_filter WHERE cid = '1:7ee834acd95a5efc693cacccaa73a62b' in /var/www/mythdora/html/includes/cache.inc on line 26.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: UPDATE cache_filter SET data = '<p>\"Please ignore the man behind the curtain\"<br />\nDennis</p>\n', created = 1369322665, expire = 1369409065, headers = '', serialized = 0 WHERE cid = '1:7ee834acd95a5efc693cacccaa73a62b' in /var/www/mythdora/html/includes/cache.inc on line 109.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: SELECT data, created, headers, expire, serialized FROM cache_filter WHERE cid = '1:f1ce1444704b3e9df0a5bee4bf50c117' in /var/www/mythdora/html/includes/cache.inc on line 26.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: UPDATE cache_filter SET data = '<p>A step backward....</p>\n<p>I powered the unit down to install it into the entertainment unit and now the remote doesn\'t work at all!!! AAAAAARGHH!</p>\n<p>Back to the drawing board!</p>\n<p>BBB</p>\n<p>\"No, my powers can only be used for good.\"</p>\n', created = 1369322665, expire = 1369409065, headers = '', serialized = 0 WHERE cid = '1:f1ce1444704b3e9df0a5bee4bf50c117' in /var/www/mythdora/html/includes/cache.inc on line 109.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: SELECT data, created, headers, expire, serialized FROM cache_filter WHERE cid = '1:aaad2dbb73e5a48d4f0d207c56b7dc6f' in /var/www/mythdora/html/includes/cache.inc on line 26.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: UPDATE cache_filter SET data = '<p>The End.</p>\n', created = 1369322665, expire = 1369409065, headers = '', serialized = 0 WHERE cid = '1:aaad2dbb73e5a48d4f0d207c56b7dc6f' in /var/www/mythdora/html/includes/cache.inc on line 109.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: SELECT data, created, headers, expire, serialized FROM cache_filter WHERE cid = '1:c73503310748a4bab7f8bfbe88fbbe32' in /var/www/mythdora/html/includes/cache.inc on line 26.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: UPDATE cache_filter SET data = '<p>hmm, thats very strange. My only suggestion is to make sure you have the external USB IR reciever hooked up to the same usb port that you had it originally working in. Its a long shot, but it wont hurt trying</p>\n<p>Also run IRW in terminal and press some buttons on the remote. If it is a software problem, rather then a hardware problem with the reciever, all your button presses should be listed.</p>\n', created = 1369322665, expire = 1369409065, headers = '', serialized = 0 WHERE cid = '1:c73503310748a4bab7f8bfbe88fbbe32' in /var/www/mythdora/html/includes/cache.inc on line 109.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: SELECT data, created, headers, expire, serialized FROM cache_filter WHERE cid = '1:94a766028b9bdbd2329b8841f97fe835' in /var/www/mythdora/html/includes/cache.inc on line 26.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: UPDATE cache_filter SET data = '<p>No response in irw</p>\n<p>BBB</p>\n<p>\"No, my powers can only be used for good.\"</p>\n', created = 1369322665, expire = 1369409065, headers = '', serialized = 0 WHERE cid = '1:94a766028b9bdbd2329b8841f97fe835' in /var/www/mythdora/html/includes/cache.inc on line 109.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: SELECT data, created, headers, expire, serialized FROM cache_filter WHERE cid = '1:aaad2dbb73e5a48d4f0d207c56b7dc6f' in /var/www/mythdora/html/includes/cache.inc on line 26.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: UPDATE cache_filter SET data = '<p>The End.</p>\n', created = 1369322665, expire = 1369409065, headers = '', serialized = 0 WHERE cid = '1:aaad2dbb73e5a48d4f0d207c56b7dc6f' in /var/www/mythdora/html/includes/cache.inc on line 109.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: SELECT data, created, headers, expire, serialized FROM cache_filter WHERE cid = '1:223a289d06de2e1af0475eb1454dced8' in /var/www/mythdora/html/includes/cache.inc on line 26.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: UPDATE cache_filter SET data = '<p>Double check that the lircd process has been started (the command to start the process is \"/etc/init.d/lircd start\" ). </p>\n<p>If the lircd process is running, and irw is still not picking up any of your keypresses, then it sounds like it is definitely a hardware issue. If my suggestion above (ie: the usb ports) didnt work then you should double check that the batteries in your remote are still good. From memory, the DVICO mce remote has a little green light right up the top, so if the batteries are still working then that green right should light up when you press buttons on the remote.</p>\n', created = 1369322665, expire = 1369409065, headers = '', serialized = 0 WHERE cid = '1:223a289d06de2e1af0475eb1454dced8' in /var/www/mythdora/html/includes/cache.inc on line 109.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: SELECT data, created, headers, expire, serialized FROM cache_filter WHERE cid = '1:7709ca7e6e143e0fbc3b2f6b0fb701b2' in /var/www/mythdora/html/includes/cache.inc on line 26.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: UPDATE cache_filter SET data = '<p>Finally got a chance to have look at the box, and lo and behold, the connector for the IR receiver has an issue.</p>\n<p>Actually it was more than an issue, it had fallen off!</p>\n<p>I then had to file down my soldering iron tip to make it thin enough to get between the USB connector and the Antenna connector and then resoldered the 3 connections to the board. These are not thru - board connections, just surface mount.</p>\n<p>I suggest anyone having any sort of IR issue with the DVICO dual DVB card should have a look at this connector.</p>\n<p>Thanks again for your assistance</p>\n<p>BBB </p>\n<p>\"No, my powers can only be used for good.\"</p>\n', created = 1369322665, expire = 1369409065, headers = '', serialized = 0 WHERE cid = '1:7709ca7e6e143e0fbc3b2f6b0fb701b2' in /var/www/mythdora/html/includes/cache.inc on line 109.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: SELECT data, created, headers, expire, serialized FROM cache_filter WHERE cid = '1:aaad2dbb73e5a48d4f0d207c56b7dc6f' in /var/www/mythdora/html/includes/cache.inc on line 26.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: UPDATE cache_filter SET data = '<p>The End.</p>\n', created = 1369322665, expire = 1369409065, headers = '', serialized = 0 WHERE cid = '1:aaad2dbb73e5a48d4f0d207c56b7dc6f' in /var/www/mythdora/html/includes/cache.inc on line 109.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: SELECT data, created, headers, expire, serialized FROM cache_filter WHERE cid = '1:82d2cb4a4f6e5a2bef2b88c5df14dbdd' in /var/www/mythdora/html/includes/cache.inc on line 26.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: UPDATE cache_filter SET data = '<p>I have been trying to get audio out of the SPDIF port on my motherboard, and now it appears that whilst I have ALSA about 90% right (still too fast in Mythmusic 44.1Khz vs 48K at SPDIF) it has now caused my remote to go back to the old partly working config!!!</p>\n<p>One step forward......</p>\n<p>BBB</p>\n<p>\"No, my powers can only be used for good.\"</p>\n', created = 1369322665, expire = 1369409065, headers = '', serialized = 0 WHERE cid = '1:82d2cb4a4f6e5a2bef2b88c5df14dbdd' in /var/www/mythdora/html/includes/cache.inc on line 109.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: SELECT data, created, headers, expire, serialized FROM cache_filter WHERE cid = '1:aaad2dbb73e5a48d4f0d207c56b7dc6f' in /var/www/mythdora/html/includes/cache.inc on line 26.
- user warning: Table './drupal_gding/cache_filter' is marked as crashed and should be repaired query: UPDATE cache_filter SET data = '<p>The End.</p>\n', created = 1369322665, expire = 1369409065, headers = '', serialized = 0 WHERE cid = '1:aaad2dbb73e5a48d4f0d207c56b7dc6f' in /var/www/mythdora/html/includes/cache.inc on line 109.
Finally cracked it due to Dennis' help and suggestions.
I've finally got full remote functionality with my Dvico dual fusion dvb-t card and the MCE remote
My /etc/lircd.conf is as follows courtesy of Makkus from Whirlpool:
begin remote
name lirc.conf
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 16
pre_data 0x1
gap 251714
toggle_bit 1
repeat_bit 2
begin codes
DTV 0x0179
MP3 0x0187
DVD 0x0185
CPF 0x016C
SETUP 0x008D
SWITCH_OFF_TV 0x0164
GUIDE 0x016D
BACK 0x009E
DVD_MENU 0x008B
i 0x0166
ALT_TAB 0x000F
REPLAY 0x00A5
SKIP 0x00A3
START 0x001C
OK 0x0160
UP 0x0067
RIGHT 0x006A
DOWN 0x006C
LEFT 0x0069
VOL_UP 0x0073
VOL_DOWN 0x0072
CH_UP 0x0192
CH_DOWN 0x0193
SCREENSHOT 0x00D4
LIVE 0x0182
OPEN_FOLDER 0x0086
1 0x0002
2 0x0003
3 0x0004
4 0x0005
5 0x0006
6 0x0007
7 0x0008
8 0x0009
9 0x000A
0 0x000B
TOGGLE_ASPECT_RATIO 0x0173
FULLSCREEN 0x0174
REWIND 0x00A8
PLAY 0x00A4
FORWARD 0x00D0
MUTE 0x0071
STOP 0x0080
REC 0x00A7
SWITCH_OFF 0x0074
end codes
end remote
And my /etc/sysconfig/lircd is:
LIRCD_OPTIONS="--driver=dev/input --device=/dev/input/event2"
Enjoy!

Hey glad that worked. So
Hey glad that worked. So it's safe to say that the lircd.conf I have now will not work with a dual dvico dvb-t card? I can add another remote in for sure if thats the case.
"Please ignore the man behind the curtain"
Dennis
"Please ignore the man behind the curtain"
Dennis
A step backward....I
A step backward....
I powered the unit down to install it into the entertainment unit and now the remote doesn't work at all!!! AAAAAARGHH!
Back to the drawing board!
BBB
"No, my powers can only be used for good."
The End.
hmm, thats very strange. My
hmm, thats very strange. My only suggestion is to make sure you have the external USB IR reciever hooked up to the same usb port that you had it originally working in. Its a long shot, but it wont hurt trying
Also run IRW in terminal and press some buttons on the remote. If it is a software problem, rather then a hardware problem with the reciever, all your button presses should be listed.
No response in irw BBB "No,
No response in irw
BBB
"No, my powers can only be used for good."
The End.
Double check that the lircd
Double check that the lircd process has been started (the command to start the process is "/etc/init.d/lircd start" ).
If the lircd process is running, and irw is still not picking up any of your keypresses, then it sounds like it is definitely a hardware issue. If my suggestion above (ie: the usb ports) didnt work then you should double check that the batteries in your remote are still good. From memory, the DVICO mce remote has a little green light right up the top, so if the batteries are still working then that green right should light up when you press buttons on the remote.
Success
Finally got a chance to have look at the box, and lo and behold, the connector for the IR receiver has an issue.
Actually it was more than an issue, it had fallen off!
I then had to file down my soldering iron tip to make it thin enough to get between the USB connector and the Antenna connector and then resoldered the 3 connections to the board. These are not thru - board connections, just surface mount.
I suggest anyone having any sort of IR issue with the DVICO dual DVB card should have a look at this connector.
Thanks again for your assistance
BBB
"No, my powers can only be used for good."
The End.
ALSA involved?
I have been trying to get audio out of the SPDIF port on my motherboard, and now it appears that whilst I have ALSA about 90% right (still too fast in Mythmusic 44.1Khz vs 48K at SPDIF) it has now caused my remote to go back to the old partly working config!!!
One step forward......
BBB
"No, my powers can only be used for good."
The End.